OpenCMISSFortran  0.3
OPENCMISS::Field::ParameterSetTypes

Field parameter set type parameters. More...

Collaboration diagram for OPENCMISS::Field::ParameterSetTypes:

Variables

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_VALUES_SET_TYPE = FIELD_VALUES_SET_TYPE
 The parameter set corresponding to the field values (at time T+DT for dynamic problems)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_BOUNDARY_CONDITIONS_SET_TYPE = FIELD_BOUNDARY_CONDITIONS_SET_TYPE
 The parameter set corresponding to the field boundary condition values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_VALUES_SET_TYPE = FIELD_INITIAL_VALUES_SET_TYPE
 The parameter set corresponding to the field initial values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INCREMENTAL_VALUES_SET_TYPE = FIELD_INCREMENTAL_VALUES_SET_TYPE
 The parameter set corresponding to the field incremental values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_ANALYTIC_VALUES_SET_TYPE = FIELD_ANALYTIC_VALUES_SET_TYPE
 The parameter set corresponding to the analytic field values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_VALUES_SET_TYPE = FIELD_PREVIOUS_VALUES_SET_TYPE
 The parameter set corresponding to the previous field values (at time T)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_DISPLACEMENT_SET_TYPE = FIELD_MEAN_PREDICTED_DISPLACEMENT_SET_TYPE
 The parameter set corresponding to the mean predicited avalues (at time T+DT)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_VELOCITY_VALUES_SET_TYPE = FIELD_VELOCITY_VALUES_SET_TYPE
 The parameter set corresponding to the velocity values (at time T+DT)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_VELOCITY_SET_TYPE = FIELD_INITIAL_VELOCITY_SET_TYPE
 The parameter set corresponding to the initial velocity values for dynamic problems. This is also the previous velocity values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_VELOCITY_SET_TYPE = FIELD_PREVIOUS_VELOCITY_SET_TYPE
 The parameter set corresponding to the previous velocity values (at time T). This is also the initial velocity values for dynamic problems.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_VELOCITY_SET_TYPE = FIELD_MEAN_PREDICTED_VELOCITY_SET_TYPE
 The parameter set corresponding to the mean predicited velocity values (at time T+DT)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_ACCELERATION_VALUES_SET_TYPE = FIELD_ACCELERATION_VALUES_SET_TYPE
 The parameter set corresponding to the acceleration values (at time T+DT)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_ACCELERATION_SET_TYPE = FIELD_INITIAL_ACCELERATION_SET_TYPE
 The parameter set corresponding to the initial acceleration values for dynamic problems. This is also the previous accelearation values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_ACCELERATION_SET_TYPE = FIELD_PREVIOUS_ACCELERATION_SET_TYPE
 The parameter set corresponding to the previous acceleration values (at time T).This is also the initial acceleration values for dynamic problems.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_ACCELERATION_SET_TYPE = FIELD_MEAN_PREDICTED_ACCELERATION_SET_TYPE
 The parameter set corresponding to the mean predicited acceleration values (at time T+DT)
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PRESSURE_VALUES_SET_TYPE = FIELD_PRESSURE_VALUES_SET_TYPE
 The parameter set corresponding to the surface pressure values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_PRESSURE_SET_TYPE = FIELD_PREVIOUS_PRESSURE_SET_TYPE
 The parameter set corresponding to the previous surface pressure values (at time T).
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_IMPERMEABLE_FLAG_VALUES_SET_TYPE = FIELD_IMPERMEABLE_FLAG_VALUES_SET_TYPE
 The parameter set corresponding to the impermeable flag values.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INTEGRATED_NEUMANN_SET_TYPE = FIELD_INTEGRATED_NEUMANN_SET_TYPE
 Stores integrated Neumann values calculated from Neumann point values.

Detailed Description

Field parameter set type parameters.

See also:
OPENCMISS::Field,OPENCMISS

Variable Documentation

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_ACCELERATION_VALUES_SET_TYPE = FIELD_ACCELERATION_VALUES_SET_TYPE

The parameter set corresponding to the acceleration values (at time T+DT)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3324 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_ANALYTIC_VALUES_SET_TYPE = FIELD_ANALYTIC_VALUES_SET_TYPE

The parameter set corresponding to the analytic field values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3317 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_BOUNDARY_CONDITIONS_SET_TYPE = FIELD_BOUNDARY_CONDITIONS_SET_TYPE

The parameter set corresponding to the field boundary condition values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3314 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_IMPERMEABLE_FLAG_VALUES_SET_TYPE = FIELD_IMPERMEABLE_FLAG_VALUES_SET_TYPE

The parameter set corresponding to the impermeable flag values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3330 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INCREMENTAL_VALUES_SET_TYPE = FIELD_INCREMENTAL_VALUES_SET_TYPE

The parameter set corresponding to the field incremental values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3316 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_ACCELERATION_SET_TYPE = FIELD_INITIAL_ACCELERATION_SET_TYPE

The parameter set corresponding to the initial acceleration values for dynamic problems. This is also the previous accelearation values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3325 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_VALUES_SET_TYPE = FIELD_INITIAL_VALUES_SET_TYPE

The parameter set corresponding to the field initial values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3315 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INITIAL_VELOCITY_SET_TYPE = FIELD_INITIAL_VELOCITY_SET_TYPE

The parameter set corresponding to the initial velocity values for dynamic problems. This is also the previous velocity values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3321 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_INTEGRATED_NEUMANN_SET_TYPE = FIELD_INTEGRATED_NEUMANN_SET_TYPE

Stores integrated Neumann values calculated from Neumann point values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3331 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_ACCELERATION_SET_TYPE = FIELD_MEAN_PREDICTED_ACCELERATION_SET_TYPE

The parameter set corresponding to the mean predicited acceleration values (at time T+DT)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3327 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_DISPLACEMENT_SET_TYPE = FIELD_MEAN_PREDICTED_DISPLACEMENT_SET_TYPE

The parameter set corresponding to the mean predicited avalues (at time T+DT)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3319 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_MEAN_PREDICTED_VELOCITY_SET_TYPE = FIELD_MEAN_PREDICTED_VELOCITY_SET_TYPE

The parameter set corresponding to the mean predicited velocity values (at time T+DT)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3323 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PRESSURE_VALUES_SET_TYPE = FIELD_PRESSURE_VALUES_SET_TYPE

The parameter set corresponding to the surface pressure values.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3328 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_ACCELERATION_SET_TYPE = FIELD_PREVIOUS_ACCELERATION_SET_TYPE

The parameter set corresponding to the previous acceleration values (at time T).This is also the initial acceleration values for dynamic problems.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3326 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_PRESSURE_SET_TYPE = FIELD_PREVIOUS_PRESSURE_SET_TYPE

The parameter set corresponding to the previous surface pressure values (at time T).

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3329 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_VALUES_SET_TYPE = FIELD_PREVIOUS_VALUES_SET_TYPE

The parameter set corresponding to the previous field values (at time T)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3318 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_PREVIOUS_VELOCITY_SET_TYPE = FIELD_PREVIOUS_VELOCITY_SET_TYPE

The parameter set corresponding to the previous velocity values (at time T). This is also the initial velocity values for dynamic problems.

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3322 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_VALUES_SET_TYPE = FIELD_VALUES_SET_TYPE

The parameter set corresponding to the field values (at time T+DT for dynamic problems)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3313 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_FIELD_VELOCITY_VALUES_SET_TYPE = FIELD_VELOCITY_VALUES_SET_TYPE

The parameter set corresponding to the velocity values (at time T+DT)

See also:
OPENCMISS::Field::ParameterSetTypes,OPENCMISS

Definition at line 3320 of file opencmiss_iron.f90.

 All Classes Files Functions Variables