OpenCMISSFortran  0.3
OPENCMISS::BoundaryConditions::Types

Specific boundary condition types, which might only be applicable to certain equation sets. More...

Collaboration diagram for OPENCMISS::BoundaryConditions::Types:

Variables

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FREE = BOUNDARY_CONDITION_FREE
 The dof is free.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED = BOUNDARY_CONDITION_FIXED
 The dof is fixed as a boundary condition.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_WALL = BOUNDARY_CONDITION_FIXED_WALL
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_INLET = BOUNDARY_CONDITION_FIXED_INLET
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_OUTLET = BOUNDARY_CONDITION_FIXED_OUTLET
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_MOVED_WALL = BOUNDARY_CONDITION_MOVED_WALL
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_MOVED_WALL_INCREMENTED = BOUNDARY_CONDITION_MOVED_WALL_INCREMENTED
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FREE_WALL = BOUNDARY_CONDITION_FREE_WALL
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_POINT = BOUNDARY_CONDITION_NEUMANN_POINT
 Specify the normal derivative at a node, which is then integrated to find the nodal load term.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_POINT_INCREMENTED = BOUNDARY_CONDITION_NEUMANN_POINT_INCREMENTED
 Specify the normal derivative at a node, which is then integrated to find the nodal load term. The value is incremented inside a load incremented control loop.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_INTEGRATED = BOUNDARY_CONDITION_NEUMANN_INTEGRATED
 Set the integrated right hand side load value directly.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_DIRICHLET = BOUNDARY_CONDITION_DIRICHLET
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_CAUCHY = BOUNDARY_CONDITION_CAUCHY
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_ROBIN = BOUNDARY_CONDITION_ROBIN
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_INCREMENTED = BOUNDARY_CONDITION_FIXED_INCREMENTED
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_PRESSURE = BOUNDARY_CONDITION_PRESSURE
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_PRESSURE_INCREMENTED = BOUNDARY_CONDITION_PRESSURE_INCREMENTED
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_CORRECTION_MASS_INCREASE = BOUNDARY_CONDITION_CORRECTION_MASS_INCREASE
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_IMPERMEABLE_WALL = BOUNDARY_CONDITION_IMPERMEABLE_WALL
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_INTEGRATED_ONLY = BOUNDARY_CONDITION_NEUMANN_INTEGRATED_ONLY
 A Neumann integrated boundary condition, and no point values will be integrated over a face or line that includes this dof.
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_FITTED = BOUNDARY_CONDITION_FIXED_FITTED
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_NONREFLECTING = BOUNDARY_CONDITION_FIXED_NONREFLECTING
INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_CELLML = BOUNDARY_CONDITION_FIXED_CELLML

Detailed Description

Specific boundary condition types, which might only be applicable to certain equation sets.

See also:
OPENCMISS::BoundaryConditions,OPENCMISS

Variable Documentation

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_CAUCHY = BOUNDARY_CONDITION_CAUCHY

Definition at line 851 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_CORRECTION_MASS_INCREASE = BOUNDARY_CONDITION_CORRECTION_MASS_INCREASE

Definition at line 858 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_DIRICHLET = BOUNDARY_CONDITION_DIRICHLET

Definition at line 850 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED = BOUNDARY_CONDITION_FIXED

The dof is fixed as a boundary condition.

Definition at line 839 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_CELLML = BOUNDARY_CONDITION_FIXED_CELLML

Definition at line 864 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_FITTED = BOUNDARY_CONDITION_FIXED_FITTED

Definition at line 862 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_INCREMENTED = BOUNDARY_CONDITION_FIXED_INCREMENTED

Definition at line 854 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_INLET = BOUNDARY_CONDITION_FIXED_INLET

Definition at line 841 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_NONREFLECTING = BOUNDARY_CONDITION_FIXED_NONREFLECTING

Definition at line 863 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_OUTLET = BOUNDARY_CONDITION_FIXED_OUTLET

Definition at line 842 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FIXED_WALL = BOUNDARY_CONDITION_FIXED_WALL

Definition at line 840 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FREE = BOUNDARY_CONDITION_FREE

The dof is free.

Definition at line 838 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_FREE_WALL = BOUNDARY_CONDITION_FREE_WALL

Definition at line 845 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_IMPERMEABLE_WALL = BOUNDARY_CONDITION_IMPERMEABLE_WALL

Definition at line 859 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_MOVED_WALL = BOUNDARY_CONDITION_MOVED_WALL

Definition at line 843 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_MOVED_WALL_INCREMENTED = BOUNDARY_CONDITION_MOVED_WALL_INCREMENTED

Definition at line 844 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_INTEGRATED = BOUNDARY_CONDITION_NEUMANN_INTEGRATED

Set the integrated right hand side load value directly.

Definition at line 849 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_INTEGRATED_ONLY = BOUNDARY_CONDITION_NEUMANN_INTEGRATED_ONLY

A Neumann integrated boundary condition, and no point values will be integrated over a face or line that includes this dof.

Definition at line 860 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_POINT = BOUNDARY_CONDITION_NEUMANN_POINT

Specify the normal derivative at a node, which is then integrated to find the nodal load term.

Definition at line 847 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_NEUMANN_POINT_INCREMENTED = BOUNDARY_CONDITION_NEUMANN_POINT_INCREMENTED

Specify the normal derivative at a node, which is then integrated to find the nodal load term. The value is incremented inside a load incremented control loop.

Definition at line 848 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_PRESSURE = BOUNDARY_CONDITION_PRESSURE

Definition at line 855 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_PRESSURE_INCREMENTED = BOUNDARY_CONDITION_PRESSURE_INCREMENTED

Definition at line 856 of file opencmiss_iron.f90.

INTEGER(INTG), parameter, public OpenCMISS_Iron::CMFE_BOUNDARY_CONDITION_ROBIN = BOUNDARY_CONDITION_ROBIN

Definition at line 852 of file opencmiss_iron.f90.

 All Classes Files Functions Variables